Table of Contents
Advertisement
Internal MP3/WMA Player/external MP3-compatible DVD
Player/Changer Mode
1 The folder list screen appears.
Select a desired folder and then touch [
([
] appears only when a file is present in the selected
folder.)
The file list screen is displayed.
• Touch [ ] to play back the folder directly.
2 Touch [ ] of a desired file name.
The selected file will be played back.
Rear Entertainment Function
The rear entertainment function independently routes different sources
to the front and the rear inside a car. For example, while listening to the
radio or other audio source in the front, DVD can be enjoyed in the rear
with the optional rear monitor and headphones.
1
Touch [SETUP] on the main source screen.
The SETUP selection screen is displayed.
2
Touch [REAR SELECT].
Rear Select display appears.
• This function cannot be used when MONITOR OUT 1 or 2 is set
to OFF in the SYSTEM SETUP.
3
Touch the desired source such as visual (auxiliary
input, built-in DVD) to select.
REAR.1: External monitor which is connected to AUX OUT of
the tuner box on this unit. (If the optional expansion
box (VPE-S431) is not connected), or an external
monitor is connected to AUX OUT1 of the optional
expansion box (VPE-S431).
REAR.2*: External monitor which is connected to AUX OUT 2
the optional expansion box (VPE-S431)
* REAR.2 is not displayed if only an external monitor is connected.
The setting screen is displayed for REAR.2 if the external monitor is
connected to the optional expansion box (VPE-S431).
• Touch [OFF] to cancel the rear entertainment function.
• When the "Setting the AUX Mode" (page 35) is set to OFF, the
auxiliary source is not displayed.
26
-EN
Switching the function of the remote
sensor
].
For optional remote control operation, the remote sensor of the external
device (monitor, etc.) can be switched, as you prefer.
4
Touch [FRONT], [REAR 1] or [REAR 2].
The monitor which has a priority to the remote control
operation is changed.
FRONT:
REAR1:
REAR2:
• The sensor of the touch panel rear monitor has priority over the
sensor of the remote control, if the rear monitor (connected to the
Alpine touch panel rear monitor via the Monitor control lead) is
touched, regardless of the remote control sensor switch setting. Note,
however, that the sensor of the remote control that has been set takes
priority if it has been 5 seconds since last touching the panel.
• When an optional DVD changer or DVD player is connected, and the
remote control sensor is set to REAR1 or REAR2, some touch button
operations ( [
In this case, set the remote control sensor to FRONT.
Switching Display Modes
While your vehicle is parked, touch [WIDE] on the visual
source screen.
Each touch changes the display modes as follows:
MODE 1
(WIDE)
In Mode 1 (Wide), the monitor displays a normal picture wider to
fit in a wide-screen monitor by evenly stretching out the picture
horizontally.
In Mode 2 (Cinema), the monitor displays a normal picture by
stretching out the picture horizontally and vertically. This mode is
good for displaying a cinema type picture at the 16 : 9 ratio.
The remote sensor of this unit is effective.
The remote sensor of the external monitor
connected to AUX OUT of the tuner box of this
unit, or the optional expansion box (VPE-S431)
is effective, and the remote control can operate
only the source selected for the terminals.
The remote sensor of the external monitor
connected to AUX OUT of the optional
expansion box (VPE-S431) is effective, and the
remote control can operate only the source
selected for the terminals.
] STOP, etc.) cannot be performed.
MODE 2
MODE 3
MODE 1
(CINEMA) (NORMAL)
(WIDE)
Hide quick links:
Advertisement
Table of Contents
