Visual Eq Operation; System Setup Operation - Alpine TMX-R1100E User Manual

NORMAL
Normal image (4:3)
4. Press or touch ENT to end the adjustment or
wait 10 seconds until OSD is shut down.
Setting Value will be saved automatically.

Visual EQ Operation

You can select a mode suitable for the subject image
• Each source is independently adjustable.
• Make adjustments within 6 seconds, otherwise
the OSD (On Screen Display) will turn off
automatically.
Sensor Touch Control
Remote Control
1. Press DIMM (DIMMER) on the
Remote Control for at least 2 seconds or touch
DIMMER at Sensor Touch Control for at
least 2 seconds to display EQ OSD.
2. Press
/ (Remote Control) to change
Visual EQ or touch (Sensor Touch Control)
to move OSD between FLAT, NIGHT
MOVIE, SOFT, SHARP and CONTRAST.
(Default Setting : SHARP)
INPUT1
VISUAL EQ
FLAT
NIGHT MOVIE
SOFT
SHARP
CONTRAST
Visual EQ Mode Selection (Factory Setting).
9
FLAT
NIGHT MOVIE
SOFT
SHARP
HIGH CONT.
• FLAT will change to CUSTOM, when any of the
picture mode (Brightness, Color, Tint, Contrast
and Sharpness) has been adjusted
• NIGHT MOVIE, SOFT, SHARP and HIGH
CONT. are fixed values. They cannot be set
manually. If the picture mode is changed, they
automatically change to CUSTOM mode.
• To return FLAT mode, press RESET on the
picture mode, or change values of BRIGHT,
COLOR, TINT, CONTRAST and SHARPNESS
to 0 manually.
3. Press ENT or touch to finish adjustment or
wait10 seconds for OSD to shut down. The
Setting Value will be saved automatically.

System Setup Operation

You can adjust each IR Transmitter of available
sources, Source Name, Sound Level.
• Once adjusted, setting value of all sources will
be changed.
NTSC
BASIC OPERATION
: Normal Setting (Visual EQ OFF)
: Suitable for movies in which dark
scenes frequently appear.
: Suitable for CGs and animated
films.
: Suitable for rold movies where
images are not clearly shown.
: Suitable for recent movies.
Sensor Touch Control
Remote Control
Continue to next page