Table of Contents
Advertisement
Chapter/Track/Title Repeat Playback
Use this function to play the disc's titles, chapters or tracks repeatedly.
DVD
1
During playback, touch [P1/2].
2
Touch [
] on the main unit.
The repeat mode switches every time the button is touched.
<Monitor display>
The chapter is played repeatedly.
The title is played repeatedly.
The playback returns to normal mode.
• Display may vary depending on the connected devices.
• The REPEAT mode is always turned off when [REPEAT] is touched
and held for at least 2 seconds.
Video CD
1
During playback, touch [P1/2].
2
During playback, touch [
The repeat mode switches every time the button is touched.
<Monitor display>
The track is played repeatedly.
The disc is played repeatedly.
*
Playback does not repeat.
* Displayed only in the changer mode.
• Display may vary depending on the connected devices.
• The track/disc repeat modes cannot be used on video CDs with
playback control (PBC). These modes can be carried out after
turning PBC off. See "Turning the PBC Function ON or OFF (Video
CD only)" on page 22 .
• For some discs it is not possible to switch the repeat mode.
• Step 1 is not necessary when a DVD changer or DVD player is
connected.
Searching by Title Number (DVD only)
Use this function to easily find positions on the DVD using the DVD's
titles.
1
Touch [P1/2] while playback is stopped.
The function guide appears.
2
Touch [10KEY].
The numeric keypad input mode screen appears.
3
Enter a desired title by touching its title number.
See page 21 for operation of the numeric keypad.
] on the main unit.
4
Confirm your selection by touching [ENT].
Playback will start from the title number selected.
• This function cannot be used on discs on which no title numbers are
recorded.
• Playback starts from the beginning of the chapter/track number in the
state of PRE STOP.
• Some disc may not accept any operation.
Searching Directly by Chapter or Track
Number
Use this function to easily move to the beginnings of the chapters or
tracks on the disc.
1
Touch [P1/2] in any mode other than stop mode.
The function guide will appear.
2
Touch [10KEY].
The numeric keypad input mode screen will appear.
3
Touch and enter the chapter or track number you
want to play.
See page 21 for operation of the numeric keypad.
4
Touch [ENT] to confirm your selection.
Playback will start from the selected chapter or track.
• This function is not available for a disc on which chapters or tracks
are not stored.
Switching the Angle (DVD only)
On DVDs in which scenes have been filmed from multiple angles, the
angle can be switched during playback.
1
During playback, touch [P1/2].
The function guide changes.
2
Touch [ANGLE].
The angle switches between the angles recorded on the
disc every time the button is touched.
• Some time may be required for the angle to change.
• Depending on the disc, the angle may switch in one of two ways.
- Seamless: The angle switches smoothly.
- Non-seamless: When the angle is switched, a still picture is
displayed first, after which the angle switches.
23
-EN
Hide quick links:
Advertisement
Table of Contents
