Table of Contents
Advertisement
Adjusting the Rear Camera Guide
If you select "Rear," you can adjust the camera guide position.
Setting item: Guide Adjustment
1
Touch [Guide Adjustment].
The camera guide adjustment screen is displayed.
2
Touch the guide you intend to adjust.
Guide line can also be selected by touching [
Display example for rear camera mode
3
Touch [
], [
], [
of the guide.
• Touching [Clear] clears adjustments and returns to the setting
before guide line alteration.
4
After the adjustment is completed, touch [Set].
Adjusting guides simultaneously
1
Touch [Link].
The 3 vertical guides of the currently-selected guide link
together, allowing them to be adjusted simultaneously.
Turning guide display On/Off
Turning the selected guide off.
1
Touch [On/Off].
The currently selected guide will turn off.
2
To turn the guide on, touch [On/Off] again.
• Guides that are turned off are still adjustable.
Returning guides to default.
1
Touch [Default].
A message window will appear.
2
Touch [OK].
Adjusted values will return to default settings.
] [
] or [
] to adjust the position
Camera Interrupt Setting (Power OFF
Mode) (Rear Camera Only)
You can set whether to display the rear camera image when the gear
lever is moved to the reverse (R) position while the unit is turned off.
You can select this item only when Camera Select is "Rear."
Setting item: Interrupt (Power OFF)
Setting contents: ON (Initial setting) / OFF
].
Auxiliary (AUX) Setting
[Auxiliary (AUX)] is selected on the Application setup menu in step 3.
Refer to "Application Setup Operation" (page 22).
Setting the Auxiliary (AUX) Mode
Setting item: AUX In
Setting contents: OFF / ON (Initial setting)
OFF: AUX source and related setting items are not displayed.
ON:
AUX source and related setting items are displayed.
Switching the Visual Input Signal System
After turning on the "AUX In", this setting can be carried out. The video
input type can be changed.
Setting item: Signal
Setting contents: Auto (Initial setting) / NTSC/PAL
Auto:
NTSC/PAL:
Factory System Setup
[Factory Audio] is selected on the Application Setup Menu screen in
step 3. See "Application Setup Operation" (page 22).
• This setting item not displayed when no iDataLink module is
connected.
Setting the Source Category
You can set whether the following source icon from iDataLink module
in the Home screen is available.
Setting item: USB/iPod (Initial setting: OFF) / SiriusXM (Initial
setting: OFF)
Setting contents: ON / OFF
Setting the Maestro Module
You can change the setting of the connected iDataLink module.
Setting item: Maestro Module
• Depending on the iDataLink module, the setting contents may differ.
The video input signal type (NTSC or PAL) will
be automatically selected.
Choose the video input signal type manually.
23
-EN
Advertisement
Table of Contents
