Setting The Aux Mode; Adjusting The External Input Audio Level; Switching The Visual Input Signal; Setting The Picture Output - Alpine IVA-D100RB Owner's Manual

Setting the AUX Mode

Setting item: AUX IN
Setting content: OFF / ON / CAMERA / VCR / GAME / TV / DVB-T /
EXT. DVD / EXTPLYR
OFF: AUX source is not displayed.
ON: AUX source is displayed.
• OFF is not displayed when the optional DVD player or DVD changer
is connected. During SYSTEM set up, although the AUX name can be
changed, it is not displayed on the source selection screen.
• When OFF is selected, the settings related to AUX cannot be changed
from this unit.
• If "CAMERA" is selected, CAMERA mode name is displayed on the
VISUAL selection screen. When the rear camera is selected even if
the shift lever is not set to reverse (R), the rear picture is output by
selecting CAMERA.
• The selected name is displayed on the VISUAL and REAR selection
screen.
• Only when an Alpine TV tuner is connected, you can operate the
displayed function guide from this unit.
• The selected source name is displayed instead of AUX source name.
Select SOURCE to switch to the guide function of each mode.
However "EXTPLYR" cannot be currently used, but will become
available when the system is expanded in the future.
• When the AUX name other than "CAMERA" is selected on the
Source Select screen, "CAMERA" cannot be selected. If an other
source (Radio, etc.) is selected on the Source Select screen,
"CAMERA" can be selected.

Adjusting the External Input Audio Level

After setting to ON in "Setting the AUX Mode," this setting can be
carried out.
Setting item: AUX IN LEVEL
Setting content: LOW / HIGH
LOW: Decreases the external input audio level
HIGH: Increases the external input audio level

Switching the Visual Input Signal

After setting to ON in "Setting the AUX Mode," this setting can be
carried out.
Setting item: AUX IN SIGNAL
Setting content: NTSC / PAL
• The video input type can be changed.

Setting the Picture Output

Outputs the picture of the source selected on the IVA-D100R/IVA-
D100RB connected to the rear monitor.
Setting item: AUX OUT
Setting content: OFF / ON
ON: The "REAR SELECT" item is displayed on the SETUP
select screen.
Touch [ ] of REAR SELECT to change to the REAR
select screen, then touch [
selected source picture is output on the rear monitor.
OFF: The "REAR SELECT" item is not displayed on the SETUP
select screen.
] of the desired source. The

Setting the VISUAL Button

Setting item: VISUAL KEY
Setting content: VISUAL / NAV.
NAV.: Switches directly to the navigation screen by pressing
VISUAL. (Only when an Alpine optional RGB
Navigation is connected.)
VISUAL: Recalls the VISUAL Select screen by pressing
VISUAL.
Changing the Lighting Colour of Buttons
(IVA-D100R only)
Setting item: ILLUM. COLOR
Setting content: GREEN / RED
GREEN: Lighting colour is green.
RED: Lighting colour is red.

Subwoofer On and Off

Setting item: SUBW. OUT
Setting contents: ON / OFF
ON: Subwoofer output is on.
OFF: Subwoofer output is off.

Setting the Digital Output

To connect an audio processor using the optical digital output, set to
"ON" by the following procedure.
Setting item: OPTICAL OUT
Setting contents: OFF / ON
• Afterwards, set ACC to OFF once, then turn it ON again. The setting
of Digital Output is decided.
37
-EN