Setup Operations; Subwoofer On And Off; Adjusting Source Signal Levels; Setting The Aux Mode (Cdm-9807Rb/Cdm-9805R/Cdm-9803Rm/ Cdm-9803R Only) - Alpine CDM-9805R Owner's Manual

SETUP Operations

SOURCE/
POWER
BAND
g f F/SETUP

Subwoofer On and Off

1
Press and hold the F/SETUP button for at least 3
seconds.
2
Press the g or f button to select the SUB
(Subwoofer) mode.
3
Press the BAND button to select Subwoofer ON
or OFF.
4
After setting is completed, press the F/SETUP
button to return to normal mode.
NOTES
• Initial mode is "SUB-W ON."
• Set to "SUBW OFF" unless the subwoofer is used.
• When the subwoofer is turned on, the subwoofer
output level can be adjusted. For more details, refer
to the Adjusting Volume/Balance/Fader.

Adjusting Source Signal Levels

If the difference in volume level between the CD
player and FM radio is too great, adjust the FM
signal level as follows.
1
Press and hold the F/SETUP button for at least 3
seconds.
2
Press the g or f button to select the FM
LV (FM LEVEL) mode.
3
Press the BAND button to select the FM signal
level HI (High) or LO (Low) to make the signal
levels between the FM band and CD player
closer.
4
Press the F/SETUP button to return to normal
mode.
16
-EN
Setting the AUX Mode
(CDM-9807RB/CDM-9805R/CDM-
9803RM/CDM-9803R only)
You can input TV/video sound by connecting an
optional "M-Bus V-Link" (M-Bus/RCA interface
cable KCM-122B) to this component.
1
Press and hold the F/SETUP button for at least 3
seconds.
2
Press the g or f button to select the AUX
mode.
3
Press the BAND button to toggle the mode
between AUX ON and AUX OFF.
4
Press the F/SETUP button to return to normal
mode.
5
To adjust the volume, etc., first press the
SOURCE/POWER button and select the AUX
mode, then make the necessary adjustment.
→ TUNER → CD → AUX
NOTE
When AUX ON is selected, a CD Changer cannot be
used.