Adjusting Source Signal Levels; Pi Seek Setting; Receiving Rds Regional (Local) Stations; Switching The Display Language Of Pty (Programme Type) - Alpine IVA-D100RB Owner's Manual

Adjusting Source Signal Levels

If the difference in volume level between the CD and FM radio is too
great, adjust the FM signal level as follows.
Setting item: FM LEVEL
Setting content: LOW / HIGH

PI SEEK Setting

Setting item: PI SEEK
Setting content: OFF / AUTO

Receiving RDS Regional (Local) Stations

When OFF is selected, the unit automatically keeps receiving the related
local RDS station.
Setting item: RDS REGIONAL
Setting content: OFF / ON
Switching the Display Language of PTY
(Programme Type)
You can select one of the patterns of the display languages.
Setting item: PTY LANGUAGE
Setting content: GB / NL / F / D / I / E
Setting PTY31 (Emergency Broadcast)
Reception
PTY31 (Emergency Broadcast) reception can be set to ON/OFF.
Setting item: PTY31
Setting content: ON / OFF
• The unit automatically gives priority to an Emergency Broadcast
whenever it begins, and interrupts the programme you are currently
listening to when PTY31 is set to on.
• The unit will show "ALARM" in the display during PTY31 reception.

Playing MP3/WMA Data

When using discs containing both audio data and MP3/WMA data.
Setting item: PLAY MODE
Setting content: CD / CMPM
CD: Plays only the audio data on discs containing both audio
data and MP3/WMA data.
CMPM: Plays only the MP3/WMA files on discs containing both
audio data and MP3/WMA data.
• If a disc is inserted, remove it from this unit before setting.
• When an MP3-compatible CD changer is used, this setting cannot be
applied.

Changing the Russian Font

Two type of font can be selected.
Setting item: LANGUAGE SELECT
Setting content: MODE1 / MODE2
MODE1: Usual font display (ISO8859-1)
MODE2: Russian font display (WINDOWS-1251)
• Russian font display does not apply to RDS mode.
Adjusting the Dimmer of Button Lighting at
Night
You can adjust the brightness of the button lighting at night with the
dimmer.
Setting item: LED DIMMER LEVEL
Setting level: -2 to +2
• The adjustment is available when ON or AUTO is set in "Setting the
Brightness of the Backlighting" (page 38).
• The adjusted brightness is reflected in the button lighting and guide
indicator. However, if the level is set to "-2", the guide indicator
turns off.
35
-EN