Setting; General Setting; Turning The Clock Display On/Off; Setting The Aux Setup Mode - Alpine CDE-163BT Owner's Manual

SETUP
Rotary encoder
/SETUP
/ENTER 


/SOURCE

Setting

You can flexibly customize the unit to suit your own preferences and
usage. From the SETUP menu, GENERAL Setting, DISPLAY Setting,
etc., can be modified.
Use steps 1 to 5 to select one of the SETUP modes to modify.
See the applicable section below for details about the
selected SETUP item.
1
Press and hold YSETUP for at least 2 seconds to
activate the SETUP mode.
2
Turn the Rotary encoder to select the desired item, and
then press ENTER.
*1
 GENERAL  DISPLAY  TUNER  SIRIUS XM
AUDIO
IPOD  APP  BLUETOOTH
(e.g. Select GENERAL)
GENERAL:
*4
 PWR CLOCK  AUX SETUP  AUX NAME
CLOCK ADJ
INTERRUPT  PLAY MODE
OPENING
DISPLAY:
ILLUMINATI  DIMMER  DIMM LEVEL
SCROLLTYPE
TUNER:
TUNER FREQ  FM SET
iPod:
iPod LIST
APP:
ALPINE APP  TTS VOLUME
*1 Refer to "Sound Setting" on page 15.
*2 Refer to "SiriusXM Setting" on page 41.
*3 Refer to "Bluetooth SETUP" on page 29.
*4 Refer to "Setting Time" on page 10.
*5 Displayed only when AUX SETUP is set to ON.
*6 Only for CDE-163BT.
*7 Not displayed when "DIMMER" is set to "OFF".
3
Select an Item with the Rotary encoder, and then press
ENTER.
(e.g. Select AUX SETUP)
4
Turn the Rotary encoder to change the setting, and then
press ENTER.
(e.g. Select ON or OFF)
DIM.
6
*2

*3
*5
*6
 STAY ON  DEMO MODE 
*7
 TEXTSCROLL 
5
Press and hold YSETUP for at least 2 seconds to return
to normal mode.
Notes
• Press t to return to the previous mode.
• If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.

General Setting

Turning the Clock Display ON/OFF

 Setting item: PWR CLOCK
Setting contents:
OFF / ON (Initial setting)
OFF:
The clock isn't displayed when the power is off.
ON:
The clock is displayed when the power is off.

Setting the AUX SETUP mode

You can input the audio of an external device, (such as a Portable audio
player) to the AUX connector of this unit.
 Setting item: AUX SETUP
Setting contents:
OFF / ON (Initial setting)
OFF:
When set to OFF, AUX source cannot be selected.
ON:
Set to ON when a portable device is connected. If VSOURCE is
pressed and AUX is selected, the sound of the portable device is
input to the unit.
Note
• Refer to "Using the Front AUX Input Terminal" on page 23 for more
details.

Setting the AUX NAME mode


You can change the AUX NAME display in the SETUP mode.
 Setting item: AUX NAME
Setting contents:
AUXILIARY (Initial setting) / TV / DVD / PORTABLE / GAME

Setting the interrupt mode

If a device having the interrupt feature is connected, audio will be
automatically muted whenever the interrupt signal is received from the
external device.
 Setting item: INTERRUPT
Setting contents:
INT AUX / INT MUTE / MUTE FLASH (Initial setting)
INT AUX:
When the interrupt signal is received from external device, the
AUX source volume will be output from the unit. If the volume
level is changed during this period, the changed volume level will
be memorized. When the interrupt signal is received next time,
the volume level will be automatically adjusted to the level
memorized. This function is valid even though the unit is powered
off.
INT MUTE:
When the interrupt signal is received, the unit will be muted.
MUTE FLASH:
When the interrupt signal is received, the unit will be muted and
backlight changed color.
25
-EN