Connect the Ai-NET compatible audio processor (Fiber digital compatible), Navigation system, DVD player and
changer.
<Monitor unit>
(White/Brown)
(White/Brown)
REMOTE OUT
REMOTE IN
• When the fiber digital compatible product is connected, it is necessary to set the mode of this unit. Refer to "Setting the Digital Output" (page 37).
• When the NVE-N055PS is connected for the Navigation System, use the RGB conversion cable KCE-030N (Sold separately).
Please observe the following when using Fiber Optic Cable.
• Do not coil the Fiber Optic Cable smaller than a 30 mm radius.
• Do not place anything on top of the Fiber Optic Cable.
• Be careful not to bend the Fiber Optic Cable at a sharp angle.