Adjustment Procedure for Dolby
Surround
Make the adjustments described below in order to reproduce Dolby
Digital and DTS sound with greater accuracy.
Adjustment procedure
1
Speaker Setup (page 46)
(Turning the speakers to be used on and off and
setting their response)
2
Adjusting the speaker levels (page 47)
(Adjusting the signal output level to the various
speakers)
3
Mixing bass sound to the rear channel
(page 47)
(Achieving smooth sound in the rear seat by mixing
the front audio signals with the rear speaker signals)
4
Adjusting the acoustic image (page 46)
(Adjusting the acoustic image to achieve a sound as
if the centre speaker were directly in front of the
listener)
5
Achieving powerful high volume sound
(page 47)
(Achieving energetic sound with even greater power,
like the sound in a movie theater)
6
Adjusting the DVD Level (page 47)
(Adjust the volume (signal level) in the Dolby Digital,
Pro Logic II, DTS and PCM modes.)
Storing Settings in the Memory (page 47)
7
(Storing all the settings and adjustments made on the
IVA-D100R/IVA-D100RB (not only the above settings/
adjusts) in the memory)
In case of combining the Automatic adjustments, etc.
We recommend to make the Automatic adjustments before the Dolby
Surround adjustments.
42
-EN
Setting the Speakers
1
Check that Defeat mode is off (pages 26, 27).
2
Press SETUP.
The SETUP selection screen is displayed.
3
Touch [
] of i-Personalize.
The i-Personalize screen appears.
4
Touch [
] of A.PROCESSOR.
The A.PROC list screen appears.
5
Touch [
] of SPEAKER SELECT.
The SPEAKER SELECT screen appears.
6
Set the connected speaker by touching the
respective [ ] or [ ] button.
FRONT1:
OFF/FULL (Full Range)/TW (Tweeter)
FRONT2:
OFF/ON
OFF/ON
REAR:
CENTER:
OFF/ON
SUBW.:
OFF/MONO/STEREO
7
Touch [RTN] to return to the previous screen.
• Set the speaker which is not connected to OFF.
• Settings above can be carried out even when the speaker is set to
OFF in "Speaker Setup" (page 46).
• To use the subwoofer in MONO with PXA-H700 or PXA-H701
connected, connect the subwoofer to the subwoofer output terminal
of PXA-H700 or PXA-H701.
Set MX Mode of the External Audio
Processor
Before performing the operations below, set MX (Media Xpander)
mode of the PXA-H700 to "AUTO" when the PXA-H700 is connected.
1
Check that Defeat mode is off, and select the source
to be adjusted.
2
Press SETUP.
The SETUP selection screen appears.
3
Touch [
] of i-Personalize.
The i-Personalize screen will appear.
4
Touch [
] of A.PROCESSOR.
The A.PROC list screen appears.
5
Select ON or OFF of MX by touching [ ] or [ ] of
MEDIA XPANDER.
OFF: Turns off the MX effect of every music source.
ON:
Turns on the specified MX mode.