Switching The Font Background Colour; Turning The Touch Panel Vibration On Or Off; Adjusting The Touch Panel; Visual Eq - Alpine IVA-D100RB Owner's Manual

Switching the Font Background Colour

You can choose from 5 different colours for the font background.
Setting item: BASE COLOR
Setting contents: MODE 1 to MODE 5
Turning the Touch Panel Vibration ON or
OFF
You can turn the touch panel's vibration ON or OFF during operation.
Setting item: PULSETOUCH
Setting content: OFF / ON
OFF: Turns off vibration during operation.
ON: Turns on vibration during operation.

Adjusting the Touch Panel

Adjustment becomes necessary when the display position on the LCD
and the touch position on the touch panel do not match.
Setting item: SCREEN ALIGNMENT
Setting content: / RESET
1 Touch [ ] of SCREEN ALIGNMENT.
The adjustment screen appears.
2 Accurately touch the
corner of the screen.
The screen changes to the adjustment screen.
3 Accurately touch the
corner of the screen.
This completes adjustment, and returns to the DISPLAY
setup mode screen.
• If you have touched a location other than the
[RESET] to restore the adjustment screen to the initial setting.
• If you touch [RTN] on the adjustment screen, no adjustment is done
and the DISPLAY setup screen is restored.
mark provided in the lower left
mark provided in the upper right
mark, touch
i-Personalize™

VISUAL EQ™

Visual EQ Setting Operation

The Parking Brake must be engaged to access the
i-Personalize mode screen. Attempting to access this screen
while driving will display the warning-CAN'T OPERATE
WHILE DRIVING.
The following steps 1 to 6 are common operations to each
"Setting item" of VISUAL EQ setting. Refer to each section for
details
1
Press SETUP.
The SETUP selection screen is displayed.
2
Touch [ ] of i-Personalize.
The i-Personalize setup screen appears.
3
Touch [ ] of VISUAL EQ.
VISUAL EQ screen appears.
4
Select a desired setting item by touching [ ] or [ ].
Setting items:
VISUAL EQ* BRIGHT
SHARP* USER PRESET*
* The setting is available in the visual source mode. (except navigation
screen)
5
Change the setting on the selected item by touching
its [ ] or [ ].
6
Touch [RTN] to return to the previous screen.
COLOR* TINT* CONTRAST
39
-EN