NEC SuperScript 610 User Manual page 67

Printing with Your SuperScript 610
[Using the Optional 200-sheet Hopper] (refer to page
8-13)
1. Specify "Manual Feed."
2. Open the manual feed cover and insert print
sheets into the printer one by one (refer to
Chapter 8 "Manual Feed"). **
SuperScript prints every odd-numbered page of
your document, starting with the last odd-num-
bered page.
3. Pick up the printed sheets of paper, straighten*
them, then reinsert them one by one into the
Silentwriter SuperScript 610 printer, starting with
the sheet having the smallest page number. **
The reinserting direction is the same as in [Using
the Standard Hopper].
4. SuperScript prints every even-numbered page on
the backs of the pages already printed.
* : Curled printed sheets may cause jamming.
Straighten the sheets before reinserting them
into the hopper.
** : To feed sheets continuously, you must insert
sheets following the printer's timing. The next
sheet should be inserted within 5 seconds after
the current sheet has completely entered into
the printer.
If the timing is not satisfied, SuperScript
detects a Paper Out condition and then
pauses. In this case, click the RESUME
button to restart.
3–9