2–28
Setting Up
To install the SuperScript software:
1. Place the NEC SuperScript software diskette #1
into the appropriate disk drive of your computer,
say A:. Close the drive door or lever if the drive
has one.
2. Start Microsoft Windows. At the DOS prompt,
type:
WIN/3
Windows will start up as usual, after which the
Program Manager group window should be
displayed on your screen. If the Program Man-
ager group appears as an icon, restore it by
double-clicking on the icon.
3. From the Program Manger menu, click on File.
Then click on the Run... option. The Run Pro-
gram dialog box appears.
4. At the prompt, type:
[A:] NECSETUP
where [A:] is the letter of the drive containing the
SuperScript software diskette. The first setup
screen appears as shown in the following figure.