Table of Contents
Advertisement
10–34
Troubleshooting
Unexpected
Font in Either
GDI or PCL
Mode
4. Click on the TrueType button. You should see
the following dialog box:
5. Put an X in the boxes marked Enable TrueType
Fonts and Show Only TrueType Fonts in
Applications.
6. Exit and return to your application. Your screen
and output will now show only TrueType fonts.
The Windows 3.1 user documentation has some
additional information on fonts and their usage.
This can happen if you are trying to print a document
created with fonts that you do not have been installed
on your system. The solution is to install the missing
font, or select another font that works properly.
The Windows 3.1 user documentation has some
additional information on fonts and their usage.
Advertisement
Table of Contents
