Table of Contents
Advertisement
10. The installation program now displays a message
telling you that setup is complete. Choose
Restart Windows to start Windows over again,
or Exit to quit the setup program.
NOTE: You will have to restart Windows before
SuperScript can start running.
11. When Windows is restarted, NEC SuperScript
Test Program will check to make sure all the
print modes work correctly. The Test program
will print several pages during the test, including
a configuration page containing information
about your system and printer.
NOTE: It is a good idea to save a copy of the most
recent configuration page with your manual. It may
be useful if you ever need to call Customer Support.
Setting Up
2–35
Advertisement
Table of Contents
