Paper - NEC SuperScript 950C User Manual

in again. If the Indicator Light keeps on blinking very
rapidly, contact technical support.
TM
This is not a SuperScript
If you are connected to another NEC printer through a
switch box, but printing with the NEC SS950C driver, this
message will be displayed on the printer monitor.
Just switch to the NEC SS950C printer.

Paper

The following problems related to the paper may occur:
• Out of paper message
• Paper does not load
• Paper jams
• Printed paper does not stack correctly
Out of paper message
If during printing, there is no paper either in the Main
Paper Tray or the Input/Output Paper Tray, a message
will be appear in Printer Monitor Status Tab and the light
indicator will flash rapidly.
To clear this condition, load paper in either of the paper
trays and press the paper button
Panel.
If you have selected the Manual Paper source in the
Settings Tab of your driver, press the Paper button
the Operator Panel.
950C Printer
on the Operator
on
Paper Does Not Load
• Check that the paper is within the specifications stated
and is not curled, crumpled or torn.
• Check that the paper is positioned correctly.
• Check that the paper is not held too tightly nor has too
much play.
• Check that the correct paper source is selected in your
printer driver.
• Repeat the paper loading procedure.
The Printer Does Not Feed the Paper
If the printer is not able to feed the paper for printing, it
will stop and the indicator light on the operator panel
starts to blink.
If this happens frequently, the cause may be an
accumulation of paper dust, ink, or other substances on
the paper drive rollers.
42