Table of Contents
Advertisement
Loading the Manual Feeder
Use these directions to load a single sheet of paper in the
Manual feeder:
1. Make sure that Manual Feeding is selected on the
Settings tab of the SuperScript 950C driver.
2.
Insert the sheet in the manual insertion slot in the lower
front part of the printer when asked.
3.
Align the sheet (to the right guide of the insertion slot
when the printer is in Primary Profile and align the
sheet to the left guide of the insertion slot if the printer is
kept in Optional Profile) and push it all the way in until
you hear the printer beep.
Primary Profile (V)
Optional Profile (H)
10
SuperScript 950C— User's Guide
4. Make sure the sheet is aligned between the side guides
and against the drive rollers.
5.
Click on the OK button for the paper insertion message
to start the print job.
Drive Rollers
Advertisement
Table of Contents
