NEC SuperScript 950C User Manual page 47

Table of Contents

Advertisement

To clean the paper drive rollers:
1. Open the printer by pressing the release button
highlighted in the figure, (If the printer is in vertical
operating position, you need to rotate it to the
horizontal position).
2. Hold down the power button
button
nine times, then release the two buttons
together. The paper drive rollers will start moving.
Wipe the moving rollers with a damp soft cloth (or
cotton swab) until they are clean.
3.
4.
Paper Jams
If the paper has already exited from the print area:
and press the paper
If the paper is jammed in one of the paper trays:
1.
2.
Turn off the printer.
Close the printer.
Remove the jammed paper, pulling it carefully
towards the Input/Output Paper Tray.
Remove any imperfect or damaged paper from the
paper tray.
Repeat the paper loading operation.
Press the paper button
.
Cancel the current print job from the Printer Monitor
Status Tab then pause the other queued jobs.
Press the power button
then disconnect the printer
from the power supply.
43

Advertisement

Table of Contents
loading

Table of Contents