NEC SuperScript 950C User Manual page 57

• Paper that is sticky or has an adhesive surface
• Paper that is pasted
• Paper that is stapled or clipped
• Label stock with the backing sheets exposed between
the individual labels
• Envelopes with thick or uneven edges
• Envelopes with clasps attached to them
• Embossed envelopes
Driver Settings
Always make sure that you have selected in your printer
driver the Paper Type and Paper Format features that
correspond to the type of printing media you intend to
use. In particular, the color calibration in the driver is set
specifically for each of the different types handled., so an
incorrect setting will result in poor quality print-out.
To access the driver settings see "The Printer Driver" on
page -17.
Paper Sizes and Capacity
The Main Paper Tray holds upto 150 sheets of 16 to 53-
pound (60 g/m2) paper. The Input/Output Paper Tray can
hold up to 10 sheets of standard U.S. letter paper, and
other paper sizes shown below. Envelopes can be feed
automatically up to 25 from the Main Paper Tray or 3 from
the Input/Output paper Tray.
The paper sizes accepted by the printer can be divided
into two categories. "Standard" and "Narrow", depending
on the format, the insertion mode will be different. Both
these formats can be inserted in the Main Paper Tray and
the Input/Output Paper Tray. Standard size is equal or
wider than 165 mm.
Table 5-1: Standard Format Sheets
Paper Size Millimeters
US Letter 216 x 279
US Legal 216 x 356
US Executive 184 x 267
DIN A4 210 x 297
B5 182 x 257
User Defined 101.6 x 148.5
(minimum)
Inches
8.5 x 11
8.5 x 14
7.25 x 10.5
8.27 x 11.69
7.16 x 10.12
4 x 5.85
53