Ms-Dos Computers; Installing Dosetup.exe; Print Cartridge Alignment; How To Print - NEC SuperScript 950C User Manual

MS-DOS C
OMPUTERS
Computers that run MS-DOS do not need to install a
printer driver. Drivers that are native to the MS-DOS
operating system can be used. All that must be installed is
dosetup.exe. Use this program for making simple
adjustments to a driver such as paper size and orientation
and for aligning the print head.

Installing dosetup.exe

To install dosetup.exe:
1. Insert the NEC SuperScript 950C Printing Solutions CD
into your computer.
2. Move to your computer's command prompt.
3. Type copy d:\dosetup.exe then press Enter to
copy dosetup.exe to the new directory.
Note:
The drive letter used in this example is "d."
The letter assigned to the CD-ROM drive in your
computer may be different.
The print cartridge must now be aligned.

Print Cartridge Alignment

Print cartridges contain both the inkjet nozzles and inkjet
ink. Align the print cartridge after installing any new
cartridge and whenever symptoms of incorrect printing
alignment appear.
To align the print head:
1. Move to your computer's command prompt.
2. Type dosetup.exe then press Enter.
3. Follow the instructions presented on the screen to
Align the print cartridge.

How to Print

To print from a DOS application:
1. Start the DOS application.
2. Open or create a file that you want to print.
3. From the File menu, select Print to open the print
dialog box.
4. Assure that LPT1 port is selected.
5. Select Print to begin printing.
How to Configure an MS-DOS Driver
A native MS-DOS printer driver can be configured by
running dosetup.exe. Basic controls, such as page sizes and
orientation, can be changed to meet you printing needs.At
the end of this section is a table that lists what commands
can be adjusted in dosetup.exe and what command values
can be used.
65