NEC SuperScript 950C User Manual page 11

Note:
If you want to print smaller sheets open the
Intermediate guide on the Main Paper Tray.
15. Fan paper and center into the Main Paper Tray
adjusting guides to fit snugly. ONLY load paper up to
the tip of the arrow shown on the inside of the Paper
Width Guides.
16. Hinge the Input/Output Paper Tray back and make
sure its Paper Width and Paper Length Guides are
open.
Note:
Perform Step 17 after installing the printer
software as described in Chapter 2.
17. Select an Operating profile.
You can keep the printer in Primary Profile (V), or you
can set the printer in Optional Profile (H). Make sure
you get a good connection of the parallel cable
especially if the Primary profile (V) is used. If you
select the Optional Profile (H) option, you must add
the Product Name Label. Remove label from its
backing and adhere it on top of current label in
recessed cavity as shown on the next page.
7