Labor Transaction Collaboration Switches; Purchase Order Collaboration Switches - IBM BJ0NJML - Service And Asset Management Integration Manual

Labor Transaction Collaboration Switches

Labor Transaction Collaboration Switches
Process Description
Control ID
LTSRC Generate service receipts for POs.
Used when creating labor transactions or
changing status. PO must exist in this system.

Purchase Order Collaboration Switches

Process Description
Control ID
PODEL Delete POs.
Used when deleting POs. Use only when
deleting then subsequently re-adding a PO
due to changes in the PO.
If any PRLINES contain a reference to the PO,
clear them. If necessary, reopen the PR. When
the PO is re-added, the PRLINEs will be
established again.
POINV Do not allow unreferenced external inventory
for internal POs.
Used when adding or updating PO lines and
changing the status of internal POs.
300
Value and Action
0 Allow setting value of
LABTRANS.GENAPPRSERVRECEIPT to Y;
configurable in the Application Setup.
Leave value of
1 LABTRANS.GENAPPRSERVRECEIPT as N.
Value and Action
0 Do not delete PO.
1 Delete PO and PRLINEs; do not delete
POSTATUS.
0 If the item-vendor combination not in
INVENTORY table, error.
1 If item-vendor combination not found in
INVENTORY table (where
PO.VENDOR = LOCATIONS.LOCATION),
ignore error.
Derivation of Derivation of
System ID 1 System ID 2
LABTRANS PO
Derivation of Derivation of
System ID 1 System ID 2
"THISMX" PO
PO LOCATIONS,
where vendor is
the storeroom
Integration Guide