Process Message
Save Message
Cancel Message
Error Management
HARRIER-042" event="1" messageid="11798570432652428">
<MXPOSet>
<PO action="Update">
.
.
.
</PO>
</MXPOSet>
</SyncMXPO>
</IR>
</ERROR>
After you complete your error XML changes in the Error Data window, you can
resubmit the message. The application then starts reprocessing the message.
The following actions are performed when the message is successfully processed:
The error file is deleted
The record in the MAXINTERRORMSG table is deleted
The DELETEFLAG, CHANGEBY, and CHANGEDATE attributes in the
MAXINTERROR table are updated
The record in the MAXINTERROR table is deleted
The application refreshes the result set and omits the successful message listing
on the main tab of the Message Reprocessing application.
The following actions are performed when message is not successfully processed:
The MAXINTERRORMSG table is updated with the new error description
The CHANGEBY and CHANGEDATE attributes in the MAXINTERROR
table are updated
An error message is created
The application refreshes the result set and displays the new error for the
unsuccessful message listing on the main tab of the Message Reprocessing
application.
After you complete your error XML changes in the Error Data window, you can
save the message. The system then saves the message and updates the
CHANGEBY and CHANGEDATE attributes in the MAXINTERROR table.
After you edit your error XML, you can cancel the message changes. When the
message is canceled, the database is not updated. The error XML file remains in
its original state.
Message Reprocessing
123