Inventory Collaboration Switches - IBM BJ0NJML - Service And Asset Management Integration Manual

Inventory Collaboration Switches

Inventory Collaboration Switches
Process Description
Control ID
INV Update inventory.
Used when creating issues, returns, or
miscellaneous receipts or adjustments.
Inventory must exist in this system.
INVDEL Delete inventory.
Used when deleting externally owned
inventory.
Attention: If value is 1, the item-storeroom
will still exist on related open PRs, POs, RFQs,
work orders, and so on. This might result in
problems receiving/approving these lines.
INVISS Enter item issues.
Used when issuing material.
INVISSR Enter item issue returns.
Used when returning material.
INVISSWO Update work order actual cost, equipment
INVCOSTs.
Used when processing issues or returns.
Meant to handle system to system cases
where these updates will be done separately.
INVPHY Enter external physical counts.
Used when creating physical counts.
296
Value and Action
0 Update inventory.
1 Do not update inventory.
0 Delete item if it passes normal system
validations.
1 Delete inventory without any validations
and delete INVBALANCES record for the
item.
0 Allow material issues for the inventory.
Do not allow material issues for the
1 inventory.
0 Allow material returns.
1 Do not allow issue returns for the material.
0 Update work order actual material cost,
equipment INVCOST.
1 Do not update work order actual material
cost, equipment INVCOST.
0 Allow physical count for the inventory.
1 Do not allow physical count for the
inventory.
Derivation of Derivation of
System ID 1 System ID 2
INVTRANS or INVENTORY
MATUSETRANS
"THISMX" INVENTORY
MATUSETRANS INVENTORY
MATUSETRANS INVENTORY
MATUSETRANS WORKORDER
INVTRANS INVENTORY
Integration Guide