Status/Exit Screen - Ikegami MLW-2420C Instruction Manual

5-4. STATUS/EXT Screen
This screen shows the input signal condition and setting status of the monitor.
• Input: Shows selected input signals. For example, the composite video is se-
lected for input, when it shows VIDEO. And it shows Y/C, PC or DVI.
• Component Select:
Shows selected input signals. This show RGB or Component, Y, Pb, Pr.
• Colour Preset:
Show selected pre-set numbers.
For example, a 000 shows that a standard colour temperature of
6500K is selected. This also displays other User settings such as 001,
002,003 004 and 005 for preset colour temperature.
• Gamma Control:
This is to show a selected Gamma value.
It can display a gamma value of 1.6 to 2.8 in every 0.1 step.
Also, it can display D14, DICOM part 14 Gamma setting.
• User: This is to display a special gamma value that the User has set to the
desired value.
• Video/S-Video Setup:
This is to display a video setup level when composite video or Y/C
signal is selected. And there are three levels.
0 shows an offset level of 0.
Mid shows an offset level is 3%.
Hi show an offset level is 7.5%.
10