Ikegami MLW-2420C Instruction Manual page 15

5-3-2. Direct Setting for Colour Pre-set, Brightness and Contrast :
(1) Colour Pre-set :
This works when pressing the Menu/SET Key for a longer period, more
than 3 seconds and a maximum 6 positions can be set. A preset number will
be displayed. The (+) key and the (-) key are for adjustment and to change
the setting.
The MENU/SET key is used to Exit.
From 0 to 5, 6 positions can be set.
(2) Brightness :
This works to display setting parameters by pressing the ( - ) key, and an
adjustment can be done by ( - ) or ( + ) key.
To exit and to store the settings, press the MENU/SET key.
(3) Contrast :
This works to display setting parameters by pressing the ( + ) key,
and an adjustment can be done by ( + ) or ( - ) key.
To exit and to store the settings press the MENU/SET key.
5-3-3. OSD Menu manipulation
To display a STATUS/EXT screen, press and hold (more than 3 seconds)
A MENU/SET key. A position of the Cursor is at Tab position and a selected
Tab colour changes.
To exit, press a MENU/SET key to hold a cursor position at STATUS/EXIT.
To select a Tab by (+) or (-) key and press a MENU/SET key to keep it.
An adjustment can be done by selecting desired parameter by (+) or (-)
Key (colour of selected parameter changes ) and a MENU/SET key makes an
adjustment possible by changes the colour of selected parameter's number.
An adjustment is made by (+) or (-) key. To save the desired parameters, press
the SAVE key. If you do not press the SAVE key, the setup goes back to the
previous settings that were set before making new adjustments.
9