Table of Contents
Advertisement
Chapter 4: Installing Components
To install or replace memory:
1
Follow the instructions in
page
2
Follow the instructions in
3
Pull the plastic tabs away from the sides of the memory module slot. If
you are replacing a memory module, remove the old module.
4
Align the notch on the new module with the notch in the memory module
slot and press the module firmly into the slot. The tabs on the sides of
the memory slot should secure the memory module automatically.
5
Follow the instructions in
6
Turn on the server. Make sure that the server turns on and that the
operating system loads completely.
7
Restart your server and open the BIOS Setup utility. Verify the
Memory
46
27.
listed in the Main menu.
www.gateway.com
"Preventing static electricity discharge" on
"Opening the server case" on page
"Closing the server case" on page
28.
32.
System
Advertisement
Table of Contents
Troubleshooting
