Opening The Server Case - Gateway 980 User Manual

Chapter 4: Installing Components

Opening the server case

Because the components inside your server are extremely sensitive to static
electricity, make sure that you follow the instructions at the beginning of this
chapter to avoid static electricity damage.
Warning
To open the server case:
1
Follow the instructions in
page
2
Turn off the server, then unplug the power cords and all other cables
connected to the server.
Warning
28
For correct cooling and air flow, always reinstall the side
panel and the air duct (if included) before you turn on the
server. Operating the server without the cover in place can
damage server components.
27.
This server has two power cords. To disconnect internal
AC power, you must unplug both power cords.
www.gateway.com
"Preventing static electricity discharge" on