Safety Guidelines - Gateway 980 User Manual

Chapter 6: Troubleshooting

Safety guidelines

While troubleshooting your server, follow these safety guidelines:
■ Never remove the side panel while your server is turned on and while the
modem cable and the power cords are connected.
■ Do not attempt to open the monitor. To do so is extremely dangerous. Even
if the power is disconnected, energy stored in the monitor components
can be dangerous. Also, opening the monitor voids its warranty.
■ Make sure that you are grounded correctly before opening the server case.
For more information about preventing damage from static electricity, see
"Preventing static electricity discharge" on page
■
After you complete any maintenance task where you have to open the
server case, make sure that you close the case, tighten any screws, then
reconnect all cables before you restart your server.
Warning
82
To avoid bodily injury, do not attempt to troubleshoot your
server problem if:
Power cords or plugs are damaged
■
Liquid has been spilled into your server
■
Your server was dropped
■
The case was damaged
■
Instead, unplug your server and contact a qualified
computer technician. If your server was damaged during
shipment from Gateway, contact Gateway Technical
Support.
www.gateway.com
27.