Gateway 980 User Manual page 60

12
If your heat sink has a fan, plug the fan into the connector on the system
board next to the heat sink.
Processor 1
fan connector
Processor 2
fan connector
13
If you have installed a new processor into the lower (processor 2) slot for
the first time, you also need to install a voltage regulator for the processor.
If you ordered the processor from Gateway, it came with a new voltage
regulator. For instructions on installing a voltage regulator, see
a voltage regulator" on page
Warning
14
Follow the instructions in
56.
Only one voltage regulator should be installed for each
processor.
"Closing the server case" on page
www.gateway.com
Installing a processor
"Installing
32.
55