Memory/Processor Problems - Gateway E-3200 Maintaining And Troubleshooting

Memory/Processor Problems

Memory errors were detected during system start up.
Probable Cause
Memory was added
or removed, and the
new configuration was
not saved in Setup
utility.
The memory was
installed incorrectly.
A memory chip is
faulty.
A new processor is not recognized by the system.
Probable Cause
The processor was
installed incorrectly.
The processor speed
was not set correctly
in the Setup utility
configuration mode.
The processor was
not seated correctly in
the socket.
Solution
Enter Setup and save the new memory
configuration.
Check the memory for proper seating and
orientation.
Replace the card on which the faulty chip
resides. Third-party diagnostic programs
can help determine which chip or memory
segment is failing.
Solution
Check the installation. The processor
should be recognized automatically if it was
installed correctly.
If your system BIOS enables you to select
the processor speed, make sure you have
selected the speed properly.
Check to make sure the processor is fully
seated in its socket.
Troubleshooting 55