Gateway E-3200 Maintaining And Troubleshooting page 78

Error Message
Required parameter
missing.
Syntax error.
Time and date not set.
Write protect error.
Solutions
Make certain you entered the right
command.
If you are trying to exit MS-DOS to return to
Windows, type and press E
EXIT
Make certain you entered the right
command.
If you are trying to exit MS-DOS to return to
Windows, type and press E
EXIT
Enter Setup utility to set the system's date
and time.
Move the write-protection tab over the hole
on the back of the diskette.
.
NTER
.
NTER
Troubleshooting 69