Gateway E-3200 Maintaining And Troubleshooting page 77

68 Maintaining and Troubleshooting Your E-3200 System
Error Message
Keyboard clock line
failure.
Keyboard controller
failure.
Keyboard controller
failure.
Keyboard not detected.
Keyboard stuck key
failure.
Memory errors were
detected while the
system powered up.
Memory size error.
Non-system disk or disk
error.
Not enough memory.
Print queue is full.
Printer is out of paper.
Solutions
Try a working keyboard.
Make certain the keyboard is compatible
with the system. You may have to change
the switch setting to AT.
Try a working keyboard.
Make certain the keyboard is compatible
with the system. You may have to change
the switch setting to AT.
Try a working keyboard.
Make certain the keyboard is compatible
with the system. You may have to change
the switch setting to AT.
See "The keyboard does not work." on
page 61.
Turn off the system and check the keyboard
cable.
Remove any objects that may be resting on
the keyboard, and then restart the system.
Check for sticky keys. Clean the keyboard if
necessary.
See "Memory errors were detected during
system start up." on page 55.
Enter Setup utility and save the memory
configuration.
Eject the diskette and press E
If the diskette is bootable, check it for
errors.
Close all programs that are not currently in
use.
Wait until the current print job has
completed before sending another print job.
If you receive this error often, you need to
add memory to the printer.
Add paper to the printer.
Make certain the printer is online.
.
NTER