Configuring More Connections Advanced Setup - ZyXEL Communications P-660HW-Tx v3 Series User Manual

6.3.2 Configuring More Connections Advanced Setup

Use this screen to edit your ZyXEL Device's advanced WAN settings. Click the
Advanced Setup button in the More Connections Edit screen. The screen
appears as shown.
Figure 36 Network > WAN > More Connections: Edit: Advanced Setup
The following table describes the labels in this screen.
Table 23 Network > WAN > More Connections: Edit: Advanced Setup
LABEL
RIP & Multicast Setup
RIP Direction
RIP Version
Multicast
ATM QoS
P-660HW-Tx v3 Series User's Guide
DESCRIPTION
This section is not available when you configure the ZyXEL Device
to be in bridge mode.
Select the RIP direction from None, Both, In Only and Out
Only.
Select the RIP version from RIP-1, RIP-2B and RIP-2M.
IGMP (Internet Group Multicast Protocol) is a network-layer
protocol used to establish membership in a multicast group. The
ZyXEL Device supports IGMP-v1, IGMP-v2 and IGMP-v3.
Select None to disable it.
Chapter 6 WAN Setup
111