ZyXEL Communications P-660HW-Tx v3 Series User Manual page 367

Select Ethernet built-in from the Connect via list.
2
Figure 165 Macintosh OS 8/9: TCP/IP
For dynamically assigned settings, select Using DHCP Server from the
3
Configure: list.
For statically assigned settings, do the following:
4
• From the Configure box, select Manually.
• Type your IP address in the IP Address box.
• Type your subnet mask in the Subnet mask box.
• Type the IP address of your ZyXEL Device in the Router address box.
Close the TCP/IP Control Panel.
5
Click Save if prompted, to save changes to your configuration.
6
Turn on your ZyXEL Device and restart your computer (if prompted).
7
Verifying Settings
Check your TCP/IP properties in the TCP/IP Control Panel window.
P-660HW-Tx v3 Series User's Guide
Appendix A Setting up Your Computer's IP Address
367