The Dhcp Setup Screen - ZyXEL Communications P-660HW-Tx v3 Series User Manual

Chapter 7 LAN Setup
Table 25 Network > LAN > IP: Advanced Setup
LABEL
Protocol Filter
Generic Filter
Back
Apply
Cancel

7.3 The DHCP Setup Screen

Use this screen to configure the DNS server information that the ZyXEL Device
sends to the DHCP client devices on the LAN. Click Network > DHCP Setup to
open this screen.
Figure 40 Network > LAN > DHCP Setup
124
DESCRIPTION
Select the protocol filter(s) to control outgoing traffic. You may
choose up to 4 sets of filters.
You can configure protocol filters in the Packet Filter screen. See
Chapter 12 on page 219
Select the generic filter(s) to control outgoing traffic. You may choose
up to 4 sets of filters.
You can configure generic filters in the Packet Filter screen. See
Chapter 12 on page 219
Click this to return to the previous screen without saving.
Click this to save your changes.
Click this to restore your previously saved settings.
for more details.
for more details.
P-660HW-Tx v3 Series User's Guide