ZyXEL Communications P-660HW-Tx v3 Series User Manual page 180

Chapter 9 Network Address Translation (NAT)
The following table describes the fields in this screen.
Table 48 Network > NAT > Address Mapping: Edit
LABEL
Type
Local Start IP
Local End IP
Global Start
IP
Global End IP
Server
Mapping Set
Edit Details
Back
Apply
Cancel
180
DESCRIPTION
Choose the port mapping type from one of the following.
One-to-One: One-to-One mode maps one local IP address to one global
IP address. Note that port numbers do not change for One-to-one NAT
mapping type.
Many-to-One: Many-to-One mode maps multiple local IP addresses to
one global IP address. This is equivalent to SUA (i.e., PAT, port address
translation), ZyXEL's Single User Account feature that previous ZyXEL
routers supported only.
Many-to-Many Overload: Many-to-Many Overload mode maps multiple
local IP addresses to shared global IP addresses.
Many-to-Many No Overload: Many-to-Many No Overload mode maps
each local IP address to unique global IP addresses.
Server: This type allows you to specify inside servers of different services
behind the NAT to be accessible to the outside world.
This is the starting local IP address (ILA). Local IP addresses are N/A for
Server port mapping.
This is the end local IP address (ILA). If your rule is for all local IP
addresses, then enter 0.0.0.0 as the Local Start IP address and
255.255.255.255 as the Local End IP address.
This field is N/A for One-to-One and Server mapping types.
This is the starting global IP address (IGA). Enter 0.0.0.0 here if you have
a dynamic IP address from your ISP.
This is the ending global IP address (IGA). This field is N/A for One-to-
One, Many-to-One and Server mapping types.
Only available when Type is set to Server.
Select a number from the drop-down menu to choose a port forwarding
set.
Click this link to go to the Port Forwarding screen to edit a port
forwarding set that you have selected in the Server Mapping Set field.
Click this to return to the previous screen without saving.
Click this to save your changes.
Click this to restore your previously saved settings.
P-660HW-Tx v3 Series User's Guide