What You Can Do In The Remote Management Screens; What You Need To Know About Remote Management - ZyXEL Communications P-660HW-Tx v3 Series User Manual

Chapter 18 Remote Management
To disable remote management of a service, select Disable in the corresponding
Access Status field.
You may only have one remote management session running at a time. The ZyXEL
Device automatically disconnects a remote management session of lower priority
when another remote management session of higher priority starts. The priorities
for the different types of remote management sessions are as follows.
Telnet
1
HTTP
2

18.1.1 What You Can Do in the Remote Management Screens

• Use the WWW screen
interface(s) and from which IP address(es) users can use HTTP to manage the
ZyXEL Device.
• Use the Telnet screen
interface(s) and from which IP address(es) users can use Telnet to manage the
ZyXEL Device.
• Use the FTP screen
interface(s) and from which IP address(es) users can use FTP to access the
ZyXEL Device.
• Use the DNS screen
interface(s) and from which IP address(es) users can send DNS queries to the
ZyXEL Device.
• Use the ICMP screen
ZyXEL Device will respond to pings and probes for services that you have not
made available.

18.1.2 What You Need to Know About Remote Management

Remote Management Limitations
Remote management does not work when:
• You have not enabled that service on the interface in the corresponding remote
management screen.
• You have disabled that service in one of the remote management screens.
• The IP address in the Secured Client IP field does not match the client IP
address. If it does not match, the ZyXEL Device will disconnect the session
immediately.
• There is already another remote management session with an equal or higher
priority running. You may only have one remote management session running
at one time.
274
(Section 18.2 on page
(Section 18.3 on page
(Section 18.4 on page
(Section 18.5 on page
(Section 18.6 on page
275) to configure through which
276) to configure through which
277) to configure through which
278) to configure through which
279) to set whether or not your
P-660HW-Tx v3 Series User's Guide