Wps Screen - ZyXEL Communications NBG-418N User Manual

The following table describes the labels in this screen.
Table 32 Network > Wireless LAN > QoS
LABEL
Enable WMM QoS
Apply
Reset

6.8 WPS Screen

Use this screen to enable/disable WPS, view or generate a new PIN number and check current WPS
status. To open this screen, click Network > Wireless LAN > WPS tab.
Figure 57 Network > Wireless LAN > WPS
The following table describes the labels in this screen.
Table 33 Network > Wireless LAN > WPS
LABEL
WPS Setup
Enable WPS
PIN Number
WPS Status
Status
NBG-418N User's Guide
DESCRIPTION
Check this to have the NBG-418N automatically give a service a priority level
according to the ToS value in the IP header of packets it sends. WMM QoS (Wifi
MultiMedia Quality of Service) gives high priority to voice and video, which makes
them run more smoothly.
Click Apply to save your changes to the NBG-418N.
Click Reset to reload the previous configuration for this screen.
DESCRIPTION
Select this to enable the WPS feature.
This displays a PIN number last time system generated. Click Generate to generate a
new PIN number.
This displays Configured when the NBG-418N has connected to a wireless network using
WPS or when Enable WPS is selected and wireless or wireless security settings have
been changed. The current wireless and wireless security settings also appear in the
screen.
This displays Unconfigured if WPS is disabled and there are no wireless or wireless
security changes on the NBG-418N or you click Release_Configuration to remove the
configured wireless and wireless security settings.
Chapter 6 Wireless LAN
79