Universal Repeater Navigation Panel - ZyXEL Communications NBG-418N User Manual

4.4.2 Universal Repeater Navigation Panel

Use the menu in the navigation panel to configure NBG-418N features in Universal Repeater
Mode.
The following screen and table show the features you can configure in Universal Repeater Mode.
Figure 35 Menu: Universal Repeater Mode
The following table describes the sub-menus.
Table 22 Menu: Universal Repeater Mode
LINK
Status
Network
WLAN
LAN
Maintenance
System
Logs
NBG-418N User's Guide
TAB FUNCTION
This screen shows the NBG-418N's general device, system and interface
status information. Use this screen to access the wizard, and summary
statistics tables.
AP Select Use this screen to choose an access point that you want the NBG-418N to
connect to. You should know the security settings of the target AP.
General Use this screen to configure wireless LAN.
MAC Filter Use the MAC filter screen to configure the NBG-418N to block access to
devices or block the devices from accessing the NBG-418N.
Advanced This screen allows you to configure advanced wireless settings.
QoS Use this screen to configure Wi-Fi Multimedia Quality of Service (WMM
QoS). WMM QoS allows you to prioritize wireless traffic according to the
delivery requirements of individual services.
WPS Use this screen to configure WPS.
WPS Station Use this screen to add a wireless station using WPS.
Scheduling Use this screen to schedule the times the Wireless LAN is enabled.
IP Use this screen to configure LAN IP address and subnet mask.
General Use this screen to view and change administrative settings such as
system and domain names, password and inactivity timer.
Time Setting Use this screen to change your NBG-418N's time and date.
View Log Use this screen to view the logs for the categories that you selected.
Chapter 4 Modes
51