Time Setting Screen - ZyXEL Communications NBG-418N User Manual

Chapter 15 System
The following table describes the labels in this screen.
Table 53 Maintenance > System > General
LABEL
System Setup
System Name
Domain Name
Administrator
Inactivity Timer
Password Setup
Old Password
New Password
Retype to Confirm
Apply
Reset

15.4 Time Setting Screen

To change your NBG-418N's time and date, click Maintenance > System > Time Setting. The
screen appears as shown. Use this screen to configure the NBG-418N's time based on your local
time zone.
126
DESCRIPTION
System Name is a unique name to identify the NBG-418N in an Ethernet network. It is
recommended you enter your computer's "Computer name" in this field (see the chapter
about wizard setup for how to find your computer's name).
This name can be up to 30 alphanumeric characters long. Spaces are not allowed, but
dashes "-" and underscores "_" are accepted.
Enter the domain name (if you know it) here. If you leave this field blank, the ISP may
assign a domain name via DHCP.
The domain name entered by you is given priority over the ISP assigned domain name.
Type how many minutes a management session can be left idle before the session times
out. The default is 5 minutes. After it times out you have to log in with your password
again. Very long idle timeouts may have security risks. A value of "0" means a
management session never times out, no matter how long it has been left idle (not
recommended).
Change your NBG-418N's password (recommended) using the fields as shown.
Type the default password or the existing password you use to access the system in this
field.
Type your new system password (up to 30 characters). Note that as you type a
password, the screen displays an asterisk (*) for each character you type.
Type the new password again in this field.
Click Apply to save your changes back to the NBG-418N.
Click Reset to begin configuring this screen afresh.
NBG-418N User's Guide