ZyXEL Communications NBG-418N User Manual page 132

Chapter 17 Tools
The following table describes the labels in this screen.
Table 56 Maintenance > Tools > Firmware
LABEL
File Path
Browse...
Upload
Note: Do not turn off the NBG-418N while firmware upload is in progress!
After you see the Firmware Upload In Process screen, wait for several minutes before logging
into the NBG-418N again.
Figure 95 Upload Warning
The NBG-418N automatically restarts in this time causing a temporary network disconnect. In some
operating systems, you may see the following icon on your desktop.
Figure 96 Network Temporarily Disconnected
After two minutes, log in again and check your new firmware version in the Status screen.
If the upload was not successful, the following screen will appear. Click Return to go back to the
Firmware screen.
Figure 97 Upload Error Message
132
DESCRIPTION
Type in the location of the file you want to upload in this field or click Browse... to find it.
Click Browse... to find the .bin file you want to upload. Remember that you must
decompress compressed (.zip) files before you can upload them.
Click Upload to begin the upload process. This process may take up to two minutes.
NBG-418N User's Guide