Chapter 3 Connection Wizard
Figure 18 Wizard Step 3: WAN MAC Address
The following table describes the fields in this screen.
Table 12 Wizard Step 3: WAN MAC Address
LABEL
Factory Default
Clone the
computer's MAC
address - MAC
Address
Set WAN MAC
Address
Back
Next
Exit
3.5 Connection Wizard Complete
Click Apply to complete the wizard setup.
Figure 19 Connection Wizard Complete
32
DESCRIPTION
Select Factory Default to use the factory assigned default MAC address.
Select this option to clone the MAC address of the computer (displaying in the screen)
from which you are configuring the NBG-418N. It is advisable to clone the MAC address
from a computer on your LAN even if your ISP does not presently require MAC address
authentication.
Select this option and enter the MAC address you want to use.
Click Back to return to the previous screen.
Click Next to continue.
Click Exit to close the wizard screen without saving.
NBG-418N User's Guide