Pptp Encapsulation - ZyXEL Communications NBG-418N User Manual

Chapter 7 WAN
Table 39 Network > WAN > Internet Connection: PPPoE Encapsulation (continued)
LABEL
First DNS Server
Second DNS
Server
WAN MAC
Address
Factory default
Clone the
computer's MAC
address - MAC
Address
Set WAN MAC
Address
Apply
Reset

7.3.3 PPTP Encapsulation

Point-to-Point Tunneling Protocol (PPTP) is a network protocol that enables secure transfer of data
from a remote client to a private server, creating a Virtual Private Network (VPN) using TCP/IP-
based networks.
PPTP supports on-demand, multi-protocol and virtual private networking over public networks, such
as the Internet.
90
DESCRIPTION
If you do not configure a DNS server, you must know the IP address of a computer in
order to access it.
Select From ISP if your ISP dynamically assigns DNS server information (and the NBG-
418N's WAN IP address). The field to the right displays the (read-only) DNS server IP
address that the ISP assigns.
Select User-Defined if you have the IP address of a DNS server. Enter the primary and
secondary DNS server's IP address in the fields to the right.
The MAC address section allows users to configure the WAN port's MAC address by using
the NBG-418N's MAC address, copying the MAC address from a computer on your LAN or
manually entering a MAC address.
Select Factory default to use the factory assigned default MAC Address.
Select this option to clone the MAC address of the computer (displaying in the screen)
from which you are configuring the NBG-418N. Once it is successfully configured, the
address will be copied to the rom file. It will not change unless you change the setting or
upload a different ROM file.
Select this option and enter the MAC address you want to use.
Click Apply to save your changes back to the NBG-418N.
Click Reset to begin configuring this screen afresh.
NBG-418N User's Guide