Ip Pool Setup; Lan Tcp/Ip; Lan Ip Screen - ZyXEL Communications NBG-418N User Manual

Chapter 8 LAN
Figure 67 LAN and WAN IP Addresses
The LAN parameters of the NBG-418N are preset in the factory with the following values:
• IP address of 192.168.1.1 with subnet mask of 255.255.255.0 (24 bits)
• DHCP server enabled with 32 client IP addresses starting from 192.168.1.33.
These parameters should work for the majority of installations. If your ISP gives you explicit DNS
server address(es), read the embedded Web Configurator help regarding what fields need to be
configured.

8.2.1 IP Pool Setup

The NBG-418N is pre-configured with a pool of 32 IP addresses starting from 192.168.1.33 to
192.168.1.64. This configuration leaves 31 IP addresses (excluding the NBG-418N itself) in the
lower range (192.168.1.2 to 192.168.1.32) for other server computers, for instance, servers for
mail, FTP, TFTP, web, etc., that you may have.
Refer to Section 3.4.6 on page 30

8.2.2 LAN TCP/IP

The NBG-418N has built-in DHCP server capability that assigns IP addresses and DNS servers to
systems that support DHCP client capability.
Refer to the

8.3 LAN IP Screen

Use this screen to change your basic LAN settings. Click Network > LAN.
94
for information on IP Address and Subnet Mask.
Section 3.4.7 on page 30 section for information on System DNS Servers.
NBG-418N User's Guide