Resetting The Nbg-418N; Using The Reset Button - ZyXEL Communications NBG-418N User Manual

2.3 Resetting the NBG-418N

If you forget your password or IP address, or you cannot access the Web Configurator, you will need
to use the RESET button at the back of the NBG-418N to reload the factory-default configuration
file. This means that you will lose all configurations that you had previously saved, the username
will be reset to admin and password will be reset to 1234. The IP address will be reset to
"192.168.1.1".

2.3.1 Using the RESET Button

Make sure the power LED is on.
1
Press the RESET button for longer than 1 second to restart/reboot the NBG-418N.
2
Press the RESET button for longer than five seconds to set the NBG-418N back to its factory-
3
default configurations.
NBG-418N User's Guide
Chapter 2 The Web Configurator
19