What You Can Do - ZyXEL Communications NBG-418N User Manual

Chapter 6 Wireless LAN

6.2 What You Can Do

Wireless screens vary according to the device mode you are using.
Wireless Screen
General
MAC Filter
Advanced
QoS
WPS
WPS Station
Scheduling
AP Select
WLAN Info
See Chapter 4 on page 35
• Use the General screen to enable the Wireless LAN, enter the SSID and select the wireless
security mode
• Use the MAC Filter screen to allow or deny wireless stations based on their MAC addresses from
connecting to the NBG-418N
• Use the Advanced screen to allow intra-BSS networking and set the RTS/CTS Threshold
6.6 on page
• Use the QoS screen to enable Wifi MultiMedia Quality of Service (WMMQoS). This allows the
NBG-418N to automatically set priority levels to services, such as e-mail, VoIP, chat, and so on
(Section 6.7 on page
• Use the WPS screen to quickly set up a wireless network with strong security, without having to
configure security settings manually
• Use the WPS Station screen to add a wireless station using WPS
• Use the Scheduling screen to set the times your wireless LAN is turned on and off
on page 81).
• Use the AP Select screen to choose an access point that you want the NBG-418N (in universal
repeater or client bridge mode) to connect to. You should know the security settings of the target
AP.
• Use the WLAN Info screen to view the SSID and security of the selected AP wireless network.
68
Router







for more information on device modes.
(Section 6.4 on page 70).
(Section 6.5 on page
76).
78).
Access Point Universal Repeater
 
 
 
 
 
 
 

75).
(Section 6.8 on page 79).
Client Bridge



(Section
(Section 6.9 on page 80).
(Section 6.10
NBG-418N User's Guide