Wap3205 Access And Login - ZyXEL Communications WAP3205 User Manual

Chapter 13 Troubleshooting
Inspect your cables for damage. Contact the vendor to replace any damaged
3
cables.
Disconnect and re-connect the power adaptor to the WAP3205.
4
If the problem continues, contact the vendor.
5

13.2 WAP3205 Access and Login

I don't know the IP address of my WAP3205.
The default IP address is 192.168.1.2.
1
If you changed the IP address and have forgotten it,
2
• and your WAP3205 is a DHCP client, you can find your IP address from the
DHCP server. This information is only available from the DHCP server which
allocates IP addresses on your network. Find this information directly from the
DHCP server or contact your system administrator for more information.
• reset your WAP3205 to change all settings back to their default. This means
your current settings are lost. See
Troubleshooting for information on resetting your WAP3205.
I forgot the password.
The default password is 1234.
1
If this does not work, you have to reset the device to its factory defaults. See
2
Section 13.4 on page
I cannot see or access the Login screen in the Web Configurator.
Make sure you are using the correct IP address.
1
• The default IP address is 192.168.1.2.
• If you changed the IP address
address.
134
Section 13.4 on page 137
137.
(Section 11.4 on page
in the
117), use the new IP
WAP3205 User's Guide