Mac Filter - ZyXEL Communications WAP3205 User Manual

Chapter 10 Wireless LAN
Table 34 Network > Wireless LAN > Security: WPA-PSK/WPA2-PSK
LABEL
Pre-Shared Key
Group Key
Update Timer
Apply
Cancel

10.6 MAC Filter

The MAC filter screen allows you to configure the WAP3205 to give exclusive
access to devices (Allow) or exclude devices from accessing the WAP3205 (Deny).
Every Ethernet device has a unique MAC (Media Access Control) address. The MAC
address is assigned at the factory and consists of six pairs of hexadecimal
characters, for example, 00:A0:C5:00:00:02. You need to know the MAC address
of the devices to configure this screen.
To change your WAP3205's MAC filter settings, click Network > Wireless LAN >
MAC Filter. The screen appears as shown.
Figure 55 Network > Wireless LAN > MAC Filter
The following table describes the labels in this menu.
Table 35 Network > Wireless LAN > MAC Filter
LABEL
Access Policy
SSID
106
DESCRIPTION
WPA-PSK/WPA2-PSK uses a simple common password for
authentication.
Type a pre-shared key from 8 to 63 case-sensitive keyboard characters.
The Group Key Update Timer is the rate at which the AP sends a new
group key out to all clients.
The default is 3600 seconds (60 minutes).
Click Apply to save your changes back to the WAP3205.
Click Cancel to reload the previous configuration for this screen.
DESCRIPTION
Select the SSID for which you want to configure MAC filtering.
WAP3205 User's Guide