Product Specifications - ZyXEL Communications WAP3205 User Manual

C
H A P T E R
The following tables summarize the WAP3205's hardware and firmware features.
Table 50 Hardware Features
Dimensions (W x D x
H)
Weight
Power Specification
Two Ethernet ports
LEDs
Reset Button
WPS button
Antenna
Operation
Environment
Storage Environment
Table 51 Firmware Features
FEATURE
Default IP Address
Default Subnet Mask
Default Password
Wireless Interface
Default Wireless SSID
WAP3205 User's Guide

Product Specifications

162 mm x 115 mm x 33 mm
245 g
Input: 100~240 V AC, 50~60 Hz
Output: 12 V DC 1A
Auto-negotiating: 10 Mbps, 100 Mbps in either half-duplex or full-
duplex mode.
Auto-crossover: Use either crossover or straight-through Ethernet
cables.
PWR, LAN1-2 WLAN, WPS
The reset button is built into the rear panel. Use this button to
restore the WAP3205 to its factory default settings. Press for 1
second to restart the device. Press for 5 seconds to restore to
factory default settings.
Press the WPS on two WPS enabled devices within 120 seconds
for a security-enabled wireless connection.
The WAP3205 is equipped with two 2dBi (2.4GHz) detachable
antennas to provide clear radio transmission and reception on the
wireless network.
Temperature: 0º C ~ 40º C / 32ºF ~ 104ºF
Humidity: 20% ~ 90%
Temperature: -30º C ~ 70º C / -22ºF ~ 158ºF
Humidity: 20% ~ 95%
DESCRIPTION
192.168.1.2
255.255.255.0 (24 bits)
1234
Wireless LAN
ZyXEL
14
139